Before
Shot |
Before
Shot |
Before
Shot |
Before
Shot |
Before
Shot |
Before
Shot |
Before
Shot |
Before
Shot |
Image
Dynamic's warehouse |
Where
Fred posts on Club B5 from |
Image
Dynamic's warehouse |
Image
Dynamic's warehouse |
Removal
of the rear seat |
Removal
of upholstery on the rear deck |
Rear
deck and trunk minus the upholstery |
No
back seat |
Removal
of stock head unit |
Removal
of stock in-dash CD player |
Removal
of Monsoon amplifier |
View
into the trunk |
Pile
of stripped down items |
Image
Dynamic's wood shop |
Image
Dynamic's wood shop |
Fred
cutting the first piece of wood |
Construction
of the rings that the subs will be mounted on |
One
of Image Dynamic's clamp racks, VERY important tools for this project! |
Construction
of the rings that the subs will be mounted on |
The
wood glue we used to make thicker pieces of wood |
That
pile of stripped parts...getting bigger... |
Cover
for rear deck with lines drawn where we will be cutting |
Cutting
the rear deck cover |
Cutting
the rear deck cover |
Constructing
the oval ring that will be installed in the rear deck. |
Constructing
the oval ring that will be installed in the rear deck. |
Two
parts to the oval ring. One goes on top of the rear deck, the other
below...and they will be glued together. |
The
ring will be used to screw the fiber glass tub into (that will be
holding the subs) |
Getting
ready to cut an oval in the rear deck with an air saw |
Cutting
the rear deck with the air saw |
Perfect
fit |
That
pile once again...getting BIGGER! |
Getting
ready to glue the two oval rings together into the rear deck |
Clamping
down the glued wooden rings |
Preparing
the wooden ring for fiber glassing, for additional support. |
Applying
fiber glass for the additional support for the two 30 pound subs |
A
finished ring that will be used to support the tub enclosed sub
woofers |
